Details
Additional freight may apply. Please give us a call to inquire for an accurate quote.
Back features a doweled,
solid-beech inner frame.
3-ply custom-contoured
beech veneer is applied to
the front and back
surfaces. Back is bolted to
a 1/4" steel bracket welded
to the frame.
Seat tilts back and the
back is slightly reclined so
the user can assume a
natural, relaxed posture.
Arms are solid beech and
connected at miter with a
90° steel dowel. A black
decorative bolt attaches the
arms to the back. The front
of the arms are inserted
into the metal leg frame and
fastened with a wood
screw.
Black nylon glides are
11⁄8" in diameter and swivel
for maximum stability on all
floors.
Legs are 1" diameter, 15-gauge
tubular steel. They are welded to
1" diameter steel cross members.
13/8" x 1/4" flat steel stretchers,
running front to back, join front and
back cross members.
Seat suspension is constructed of
19/32" molded plywood that is
machined to form an open perimeter.
Unidirectional webbing is machine
stretched across the open perimeter
and stapled to the edges to form a
suspension.
Seat cushion is 2" thick, high
resiliency, CFC-free molded
polyurethane foam. Cushion is
attached to the steel stretchers with
wood screws.
Seat upholstery features a wraparound
upholstery method and 21⁄2"
boxing with top stitching.
Back cushion, on applicable
models, is constructed of 3⁄4" thick
foam applied to a 3/16" hardboard
panel. Cushion upholstery with 1”
boxing is wrapped over the foam and
secured with upholstery staples. Halfheight
cushion attaches with press-fit
fasteners. Full-height cushion
attaches with keyhole slot at the top
of the cushion and press-fit fasteners
at the bottom of the cushion.
