Keilhauer TOM 9772, Executive High Back Ergonomic Office Chair

Keilhauer TOM Collection... Designed by Tom Deacon Multi-functional chair suitable for workstations, executive offices, or boardrooms Supports the body comfortably with inherent flexibility and adjustability generic features 4 upholstery styles 3 seat depths 3 back heights Adjustable back height (lumbar support) Adjustable tilt tension Adjustable tilt lock Forward-tilt lockout Pneumatic height adjustment 5-prong base Carpet casters generic options Softwheel casters Frame glass-reinforced nylon Foam High-density, CFC-free polyurethane, meets CAL 117 requirements Adjustable and arc arms glass-reinforced nylon Recessed arms urethane with steel insert Use: the paddle shaped lever on the right side underneath the seat To raise: lift your weight off the seat while lifting the front of the lever To lower: sit on the seat while lifting the front of the lever Use: the sides of the back just above the seat and grab with both hands To raise: lift the back up and towards you - you will hear a click for each different height To lower: lift the back to the highest setting and it will disengage allowing it to drop down to the starting (lowest) height; the back must return to the starting position to reengage the height adjustment mechanism Use: the big round knob underneath the center of the seat To increase tension: turn the knob clockwise To decrease tension: turn the knob counter-clockwise Use: the paddle shaped lever on the left side underneath the seat To unlock tilt: pull the front of the lever up and tilt back slightly To lock tilt: recline to your desired position and push the front of the lever down Forward tilt: using the small knob lever at the front right side underneath the seat, push the knob in to "in" gage forward tilt-pull the knob out to lock "out" forward tilt (the chair back must be reclined slightly each time to reset this feature) Use: the buttons on the outside of the arm rests To raise or lower: resting your thumb and palm on top of the arm rest, slide your middle fingers to the outside of the arms and squeeze the button up -raise or lower the arm rest to the desired position and release the button to lock In and out: grab the front of the arm rest and pull it back-then pivot it in or out to one of the 3 positions (there are no buttons to push) If your chair is equipped with the tom x-seat, you can adjust the depth of your seat. Of course, you must stand to make these adjustments. Use: the knob on the front left side underneath the seat To decrease the seat depth: turn the knob clockwise To increase the seat depth: turn the knob counter-clockwise